Oki ES7411 - PRINT INFORMATION MENU

Network configuration > 24
IEEE802.1X Tab
IP ADDRESS SETUP
If you only use TCP/IP and the printer has not yet been configured, occasionally it may not
be displayed on AdminManager. You can configure the IP address of the printer by this
function.
1. Select IP Address Setup from the Setup menu.
2. Set Ethernet Address and IP Address then select OK.
The Ethernet Address (MAC address) is displayed on the configuration map, refer to
“Configuration settings” on page 7.
ITEM COMMENTS
Use
IEEE802.1X
Enable/disable.
EAP Type The following Extensible Authentication Protocols
can be configured:
EAP-TLS Selects Extensible Authentication
Protocol - TLS.
PEAP Selects Protected Extensible
Authentication Protocol.
EAP User Enter EAP User name.
Use SSL/TLS
Certificate
Enable SSL/TLS certification.
Authenticate
server
Enable Server Authentication.
Certificate Client
certificate
File: (User can specify).
Password: (User can specify).
Options to Import, Delete, View.
CA certificate File: (User can specify).
Password: (User can specify).
Options to Import, Delete, View.