Mac OS X > 44
TCP/IP Connection
1. Choose Apple Menu > System Preferences > Print & Fax.
2. Click “+”.
3. Click the IP Printer button.
4. From the Protocol menu, choose Line Printer Daemon – LPD.
5. Enter the printer's IP address in Address.
To find the printer's IP address, you can print a configuration page from the printer's
operator panel. Refer to “Configuration settings” on page 7.
6. Check the correct PPD file for your printer is selected in the Print Using menu.
7. Click Add.
8. You will be prompted to configure any additional printer hardware options. If your
printer has options such as a storage device or second tray, switch on the relevant
options.
T
IGER
(10.4)
Bonjour, AppleTalk or USB
1. Launch Printer Setup Utility
This is located in the Applications > Utilities folder.
2. Click Add….
3. Select your printer model from the Default Browser.
4. Click Add.
5. Depending on the connection type, you may be prompted to configure any additional
printer hardware options. If your printer has options such as a storage device or
second tray, switch on the relevant options.
6. Quit Printer Setup Utility.
TCP/IP Connection
1. Launch Printer Setup Utility
This is located in the Applications > Utilities folder.
2. Click Add….
3. Click the IP Printer button.
4. From the Protocol menu, choose Line Printer Daemon – LPD.
To Next Page
Loading...
