Network configuration > 6
N
ETWORK
CONFIGURATION
I
NTRODUCTION
Your machine incorporates a fast 100BASE-TX/10BASE-T network interface. This guide
explains the functionality of the built in network interface. Access for interconnection is
provided via an interface panel at the rear of the machine.
This network interface supports IEEE802.2, IEEE802.3, Ethernet-II and SNAP, and can
detect those frame types automatically.
Also, the interface supports major protocols such as TCP/IP, IPX/SPX (NetWare) and
NetBEUI.
This guide details the network interface specification and several software utilities.
You should set the emulation in the printer menu settings to Auto or PS before printing the
configuration map.
NOTE
Not all utilities, features or protocols are supported by every operating
system. Please check with your support website for latest information.
To Next Page
Loading...
Need help?
General
