Oki ES9431dn User Manual

- 261 -
5
1
2
4
3
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
Setting the network from the web browser
13
Enter the CA certicate le name, and
click [OK].
Memo
z
The imported CA certicate is the authenticator
certicate issued by the RADIUS server certicate.
z
Importable le formats are PEM, DER, and PKCS#7
formats.
The CA certicate will be imported to the
device.
14
Click [Submit].
15
The settings will be save in the printer,
and the network functions will restart.
If the standby screen is displayed in the
control panel, turn OFF the device power
supply.
Reference
z
For how to turn OFF the power supply, see "Basic".
z
Go to “Connecting the device to the authentication
switch” (P.261).

Connecting the device to the
authentication switch
Memo
z
Check that the device power supply is turned OFF.
1
Insert the LAN cable into the device
LAN (network) interface connector.
2
Insert the LAN cable into the
authentication switch authentication
port.
3
Turn ON the device power supply.
4
Check that the standby screen is
displayed in the control panel.
5
Set the device IP address according to
the environment in use.

Oki ES9431dn Specifications

General

Brand	Oki
Model	ES9431dn
Category	Printer
Language	English