UNIX > 75
257 ”/lp” is current directory
ftp>
3. Configure the transfer mode.
There are two types of transfer mode: BINARY mode, in
which the file content is output as it is and ASCII mode,
which converts the LF code to the CR+LF code. If a binary
file converted by the printer driver is transferred, the
transfer mode has to be BINARY mode.
Example: Changing transfer mode to binary mode and
verifying the current mode:
ftp> type binary
200 Type set to I.
ftp> type
Using binary mode to transfer files.
ftp>
4. Transfer the print data to the network card using the put
command. Two methods of file transfer using the put
command are available.
Example: Transferring print data test.prn
ftp> put test.prn
Example: Transferring print data specified by absolute
path/users/test/test.prn
ftp> put /users/test/test.prn /lp
5. Logout from the network card using the quit command.
ftp> quit
Three states can be verified using the quote command
stat: the IP address, login user name and transfer mode.
In addition, printer status can be verified by specifying the
directory after the stat (lp, sjis, euc).
Example: Displaying network card status
ftp> quote stat
211-FTP server status:
Connected to: 192.168.20.10.000.00
User logged in: root
To Next Page
Loading...
Need help?
General
