3
Obtaining an IP address
The machine will need an IP address the easiest way to obtain this is to plug a network cable in the
back of your machine so one can be given to your machine automatically by your network.(make
sure you see two leds one will flash which is a good sign you have a good network connection .
In order for the ip address to remain the same on your machine you must change a setting called ip
address set from auto to manual,to this on the machine press the settings button,press the
down arrow until you see admin setp-up,press enter (you will be asked for a password which is
6 lower case a’s )press the down arrow until you see network menu, press enter
Press enter on network setup
Scroll down to ip address set press enter, change it from auto to manual press enter
To Next Page
Loading...
Need help?
General
