Maintenance > 115
10. Holding the complete assembly by its top centre, lower it into place in the MFP,
locating the pegs at each end into their slots in the sides of the MFP cavity.
11. Close the top cover and press down firmly so that the cover latches closed.
12. Gently lower the scanner.
NOTE
If you need to return or transport this product for any reason, please make
sure you remove the image drum unit beforehand and place in the bag
provided. This is to avoid toner spillage. Refer to “Appendix A - Moving and
transporting” on page 131 for details.
To Next Page
Loading...
