Troubleshooting > 122
I
N
THE
PRINTER
SECTION
...
1. Lift the scanner.
2. If a sheet is well advanced out of the top of the printer, simply grip it and pull gently
to draw it fully out. If it does not remove easily, do not use excessive force. It can be
removed from the rear later.
3. Press the cover release (a) and open the MFP’s top cover (b) fully.
WARNING!
If the MFP has been powered on, the fuser will be hot. This area is
clearly labelled. Do not touch.
a
b
To Next Page
Loading...
