Getting started > 31
> For two-sided (duplex) printing on headed paper load the paper with pre-printed
side down and the top edge away from the MFP.
> Envelopes should be loaded face up with top edge to the left and short edge into
the MFP. Do not select duplex printing on envelopes.
> Load transparencies face up and top edge into the MFP.
4. Set the correct paper size for the multi purpose tray in the Printer menu.
For MB460: see “Manual Feeder Config (MB460)” on page 47.
For MB470/MB480: see “MP Tray Config (MB470/MB480)” on page 47.
To Next Page
Loading...
