Oki MB460 - Page 42

Configuring your machine... > 42
Print
Information
cont.
Supplies Status
Report
Execute Prints a report of the status of all consumables
Fax Activity
Report (MB470/
MB480)
Execute
Fax Protocol
Dump (MB470/
MB480)
Execute
Print System
Status
Execute
Admin Setup System Setup Access Control Enable/Disable
Power Save Time 1/5/15/30/60/120
minutes
Return to Stand-by
Time
20/40/60/120/180
seconds
Default Mode Copy/Scan/Fax
Unit of Measure inch/mm
Date Format mm/dd/yyyy,
dd/mm/yyyy,
yyyy/mm/dd
Report Full Print On/Off
Panel Contrast -10~0~+10
Near Life Status Enable/Disable
Network Menu Network Setup TCP/IP Enable/Disable
IP Version IPv4
IPv4 + IPv6
IPv6
NetBEUI Enable/Disable
NetBIOS over TCP Enable/Disable
Ether Talk Enable/Disable
IP Address Set Auto/Manual
IPv4 Address xxx.xxx.xxx.xxx
Subnet Mask xxx.xxx.xxx.xxx
Gateway Address xxx.xxx.xxx.xxx
DNS Server Primary xxx.xxx.xxx.xxx
DNS Server
Secondary
xxx.xxx.xxx.xxx
WINS Server Primary xxx.xxx.xxx.xxx
WINS Server
Secondary
xxx.xxx.xxx.xxx
Web Enable/Disable
Telnet Enable/Disable
FTP Enable/Disable
LEVEL 2 ITEM DESCRIPTION/OPTIONS