Printing settings in windows > 87
5. Every second page (1) of your document is printed first. When this is complete, a
message appears on screen prompting you to take the paper, flip it and replace it in
the Paper Tray.
6. Open the Paper Tray (2).
7. Take the printed paper from the Output Stacker (3) and place it in the Paper Tray,
ensuring that the printed side is facing up and the bottom of the page facing into the
machine (4).
8. Close the Paper Tray and press the Start button. The message window should
disappear from your screen and the document finishes printing the remaining pages
of your document.
NOTE
You must press the Start button to start the printing for other side. The default
time is set to one minute, failing which, the data is deleted and not printed.
1
2
3
4
To Next Page
Loading...
