Oki MB770 - Page 35

45372301TH Rev.2
4-9 /
Oki Data CONFIDENTIAL
4.2.5 Alignment plate home position sensor (R) (S4)
4.2.6 Alignment plate home position sensor (L) (S5)
(1) Take off the Finisher control PC board ASSY.
( P.4-45 "4.5.1 Finisher control PC board
ASSY")
(2) Remove 1 e-ring [1], and remove main pad-
dle flag [2].
Fig. 4-15
(3) Disconnect 1 connector [3] and then take off
the alignment plate home position sensor (R)
[4].
Fig. 4-16
(1) Take off the Guide upper ASSY.
( P.4-3 "4.2.1 Guide upper ASSY")
(2) Remove 1 e-ring [1], and remove main pad-
dle flag [2].
Fig. 4-17
[1]
[2]
[3]
[4]
[1]
[2]