Oki MB770 - Page 36

45372301TH Rev.2
4-10 /
Oki Data CONFIDENTIAL
4.2.7 Ejector home position sensor (S7)
(3) Disconnect 1 connector [3] and then take off
the paddle home position sensor [4].
Fig. 4-18
(1) Take off the Guide upper ASSY.
( P.4-3 "4.2.1 Guide upper ASSY")
(2) Remove 4 screws and 1 connector [1],
remove the Guide upper ASSY [2].
Fig. 4-19
Note:
Do not forget to install the belt [3].
Fig. 4-20
[3]
[4]
[1]
[2]
[3]