Oki MC362 User Manual

- 100 -
Printing from a Computer
5
Printing
12 Click the [Exit] button.
13 Remove the “Software DVD-ROM” from
the computer.
The installation is complete.
◆ Print a test page to check that the printer
driver is successfully installed on the
computer.
1 Click [Start] > [Devices and Printers].
2 Right-click the OKI MC562 icon and
select [Printer properties] (> a desired
printer driver if you have installed
multiple drivers) from the pop-up menu.
3 On the [General] tab, click [Print Test
Page].
 For USB Connection
Follow the procedure below to connect a
USB cable and install a printer driver on your
computer.
Note
● You must be logged in as an administrator to complete
this procedure.
Memo
● You can skip this procedure if the printer driver is already
installed on your computer.
1 Prepare a USB cable.
A USB cable is not supplied with your machine.
Prepare a USB 2.0 cable separately.
Memo
● Use a USB 2.0 Hi-Speed cable for a USB 2.0 Hi-
Speed connection.
2 Hold down the power switch for
approximately one second to turn off the
power.
3 Plug one end of the USB cable into the
USB interface connector on the back of
the machine.
4 Turn on the computer.

Oki MC362 Specifications

General

Print Resolution	1200 x 600 dpi
Fax Modem Speed	33.6 Kbps
Monthly Duty Cycle	45, 000 pages
Connectivity	USB 2.0, 10/100Base-TX Ethernet
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Memory	256 MB
Scan Type	Flatbed, ADF
Copy Resolution	600 x 600 dpi
Maximum Paper Size	A4
Dimensions	427 x 509 x 444 mm
Weight	29 kg
Paper Capacity	250 sheets
Operating System Compatibility	Windows, Mac
Scan Resolution	600 x 600 dpi