- 111 -
Printing from a Computer
5
Printing
◆ Print a test page to check that the printer
driver is successfully installed on the
computer.
1 Click [Start] > [Devices and Printers].
2 Right-click the OKI MC562 icon and
select [Printer properties] (> a desired
printer driver if you have installed
multiple drivers) from the pop-up menu.
3 On the [General] tab, click [Print Test
Page].
For Mac OS X
Overview
Connecting Methods
You can select either of the following connection
methods:
● “For Network Connection” P.111
● “For USB Connection” P.119
Product Requirements
Your machine supports Mac OS X 10.3.9 to 10.8.
Types of Printer Drivers
The driver types that can be installed are as
follows.
Type Description
PS The PS printer driver is suitable for
the printing of documents including
PostScript fonts and EPS data.
It can be also used for normal printing.
AirPrint support
Mac OS X 10.7 and later are supported.
Note
● The description may be different depending on the version
of a printer driver or Mac OS X.
For Network Connection
To install a printer driver on your computer
via the network connection, follow the 3 steps
below:
● “Step 1 Conguring the Network Settings of
Your Machine” P.112
● “Step 2 Installing a Printer Driver” P.116
The following procedure uses Bonjour as a
network protocol.
Note
● You need to complete the network setting of the computer
before this procedure.
Memo
● You can skip the step 1 if the IP address is already set on
your machine.
● You can skip the step 3 if the printer driver is already
installed on your computer.
To Next Page
Loading...
Need help?
General
