EasyManuals Logo

Oki MC362dw Startup Guide

Oki MC362dw
129 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
- 57 -
Scanning to E-mail
4
Scanning
4 On the [General] tab, enter the
contents of [Name] and [E-mail
address] in B-9 and B-10 of the Setup
Information Form.
B-9
B-10
5 Click the [Servers] tab, and then
note each setting in the corresponding
columns of the Setup Information Form.
B-3
B-2
B-7
B-8
- If there is a check in the [My server
requires authentication] checkbox,
enter “SMTP” into B-4 and follow
procedure 6.
- If there is no check in the [My server
requires authentication] checkbox,
enter [POP or not yet authenticated]
in B-4. At this point the conrmation of
E-mail settings is complete.
Note
If using an internet service provider, enter [POP].
6 Click [Settings].
7 Check the login information on the
[Outgoing Mail Server] dialog box.
- If [Use same settings as my incoming
mail server] is selected, enter the same
values as B-7 and B-8 on B-5 and B-6.
- If [Log on using] is selected, note
the content of [Account name] and
[Password] in B-5 and B-6, respectively.
Step 2-2 Setting the E-mail
Address for Your Machine
When sending data scanned from the
machine by an E-mail, the E-mail address for
the machine is necessary. According to the
following procedure, set the E-mail address for
the machine and enter it in B-1 of the Setup
Information Form.
If the E-mail address for your machine is
specied by the network administrator, enter
the E-mail address in B-1.
If you are using an internet service provider,
obtain an E-mail address for your machine
from the provider and then enter the E-mail
address in B-1.
If the E-mail address for your machine is
neither specied nor obtained, determine the
E-mail address according to the value you
entered in B-4 (authentication method):
- If B-4 is “SMTP”, determine an E-mail
address and enter it in B-1.
- If B-4 is “POP”, enter the same E-mail
address as B-10 in B-1.
Note
If you want your machine to receive E-mail, you must
obtain an E-mail address for your machine from a network
administrator or your internet service provider.
Step 2-3 Conguring Your
Machine’s E-mail Settings
Set up your machine’s E-mail settings using the
information in the Setup Information Form.

Table of Contents

Other manuals for Oki MC362dw

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oki MC362dw and is the answer not in the manual?

Oki MC362dw Specifications

General IconGeneral
BrandOki
ModelMC362dw
CategoryAll in One Printer
LanguageEnglish

Related product manuals