ML320/321 Turbo Printer Handbook 15
4. Locate tractors.
5. Pull up on lock levers to release trac-
tors and swing open tractor covers. Po-
sition right-hand tractor for width of
paper you’re loading.
The movement of the left tractor is
limited to ensure that the paper
will always contact the paper sen-
sor when loaded.
6. Pull paper, and place first two holes on
each side over tractor pins.
Please note that an equal number of pa-
per holes must be engaged on either
tractor in order to ensure proper paper
feed.
Tractors
Lock lever
Tractor cover
Paper holes on pins
To Next Page
Loading...
