14 Loading Paper
Loading Rear-Feed Paper
The rear-feed paper path is recommended for single-thickness, continuous fan-fold
paper when printing spreadsheets, long reports, etc. For graphics or charts, it’s best to
use the single-sheet paper path.
To load continuous-form paper from the rear:
1. If you have paper in paper path, be sure
to remove it before installing rear-feed
paper. To remove single sheet, press FF/
LOAD button. To remove bottom-feed
paper, press PARK button.
2. Move paper lever to position marked
“REAR”.
3. Open the access cover, hold up the knob
of the paper separator, and remove the
paper separator.
(Remove the paper separator.)
Position
"Rear"
Remove
paper
separator
Knob
To Next Page
Loading...
