ML320/321 Turbo Printer Handbook 69
The menu selections for your printer are summarized below. Factory defaults are
indicated in bold face italic. Explanations for each item follow the table.
The table below summarizes all possible menu settings available with your
printer. Which of these you will actually see when you are working in the
Menu depends on the active emulation and on the options installed.
A
ppendix B: Menu Selections
Printer Control
Font
Symbol Sets
Rear Feed
IBM PPR, Epson FX, ML
Utilitity, NLQ Courier, NLQ Gothic,
DRAFT
HSD, SSD
10 cpi, 12 cpi, 15 cpi, 17.1 cpi, 20 cpi
No, Yes
Normal, Italics
Single, Double
Set I, Set II (EPSON, IBM mode)
Standard, Line Graphics, Block Graphics
(ML mode)
American, French, German, Britishi, Danish
I, Swedish, Italian, Spanish I, Japanese, Nor-
wegian, Danish II, Spanish II, Latin Ameri-
can, French Canadian, Dutch, Publisher
Slashed, Unslashed
USA, Canada French, Multilingual, Portu-
gal, Norway, BRASCII, Abicomp
6 LPI, 8 LPI
Off, 500 ms, 1 sec, 2 sec
No, Yes
13.6", 8"
11", 11
1
/
2
", 12", 14", 17", 3", 3.5", 4", 5.5", 6",
7", 8", 8.5"
Emulation Mode
Print Mode
DRAFT Mode
Pitch
Proportional Spacing
Style
Size
Character Set
Language Set
Zero Character
Code Page
Line Spacing
Form Tear-Off
Skip Over Perforation
Page Width*
Page Length
Group Item Setting
To Next Page
Loading...
