Oki Microline 3321

CUT-SHEET FEEDER     
9. Install the loading tray sheet support(s) at the back of the loading
tray(s).
To do this, hold the support with the ridged surface facing
forwards
and slide it over the square crossbar, the slots in the back
slide
onto the plate tray at the rear.
10 . Install the paper stack support (front sheet support) in the stacker. To
do this, hold the support with its ridged surface facing forward and
slide it down into the slots at either side of stacker.
11. Close the access cover.
ML3320id8.indd18ML3320id8.indd18 2015/05/0817:542015/05/0817:54
プロセスシアンプロセスシアンプロセスマゼンタプロセスマゼンタプロセスイエロープロセスイエロープロセスブラックプロセスブラック