Oki Microline 3321 - Mounting the Cut-Sheet Feeder

CUT-SHEET FEEDER
Mounting the Cut-Sheet Feeder
Before you start, make sure the printer is unplugged and turned off, and
seated on a flat, sturdy surface.
1. Open the access cover.
2. Remove any accessories, such as pull tractor unit, if installed.
3. Remove the paper separator and pull-up roller, if installed.
4. Dust the platen carefully with a clean, dry, lint-free cloth.
ML3320id8.indd14ML3320id8.indd14 2015/05/0817:542015/05/0817:54
プロセスシアンプロセスシアンプロセスマゼンタプロセスマゼンタプロセスイエロープロセスイエロープロセスブラックプロセスブラック