Oki Microline 3321 User Manual

CUT-SHEET FEEDER
Power requirements:
DC power supplied by
the printer
Pulse motor drive
power:
Control power:
+40 V, 370 mA,
+8V,
40mA
Environmental specifications
Humidity
Operating:
30 to 80% relative humidity
Non-operating
or storage: 5 to 95% relative humidity
Temperature
Operating:
Non-operating
or storage:
10 to 35°C (50 to 95° F)
-40 to 70°C (-40 to 158 ° F)
NOTES: 1. The storage temperature and humidity apply to the CSF when it is packed.
2. The CSF must be free from condensation at all times
Operating vibration:
Impact
Not operating:
Packed:
Reliability
MTBF:
Life:
0.3 g (at 10 Hz) or less
1 g or less
No damage to the Cut-Sheet Feeder in drop test
from 76.2 cm (30 inches) (6 sides, 3 edges, and 1
corner)
6,000 hours power-on
time (25% duty cycle)
12,000 hours power-on
time or 5 years (25% duty
cycle)
Specifications subject
to change without notice.
ML3320id8.indd40ML3320id8.indd40 2015/05/0817:542015/05/0817:54
プロセスシアンプロセスシアンプロセスマゼンタプロセスマゼンタプロセスイエロープロセスイエロープロセスブラックプロセスブラック

Oki Microline 3321 Specifications

General

Brand	Oki
Model	Microline 3321
Category	Printer
Language	English