Oki Microline 390 User Manual

(2)
Continuous paper feed operation (See Figure 3-8.)
The force transmitted to the platen, as explained in Paragraph (1) for cut sheet feed operation,
rotates tractor gear B through platen gear A, the idler gear and the change gear. The rotation
of tractor gear 8 makes the pin tractor belt rotate through a sheet feeder’shaft, feeding the
continuous paper.
Pin tractor belt
Platen gear A
+
Change gear
Figure 3-8 Paper feed operation for continuous paper
3-21

Oki Microline 390 Specifications

General

Print Technology	Dot Matrix
Number of Pins	24
Resolution	360 x 360 dpi
Print Resolution	360 x 360 dpi
Noise Level	55 dB
Connectivity	Parallel
Paper Handling	cut sheet
Emulations	IBM ProPrinter
Paper Width	4 to 10 inches
Weight	13 lbs