Oki MICROLINE 8810 Setup Guide

2
Printer Components
Front View
1 Ribbon Cartridge 7 Platen Knob
2 Sheet Guide 8 Power Switch
3 Sheet Platform 9 Display Panel
4 Sheet Supports 10 Stacker
5 Printhead 11 Cover
6 Control Panel
Rear View
1 Stacker 3 Parallel Port
2 Power Socket 4 USB Port
Step 2:
Set Up the Printer
Remove the Printhead Shipping
Restraint
1. Open the cover using the grips on either side.
2. Peel the protective plastic film off the display
panel.
3. Tilt the display panel toward you.
F1_24a1.jpg
F1_24b1.jpg
F2_03_open_
cover.jpg
F2_15c.jpg
F2_04_Tilt_D
isplay.jpg

Oki MICROLINE 8810 Specifications

General

Color	No
Built-in barcodes	EAN13, PostNet, UPC-A, UPC-E
Maximum number of copies	8 copies
Fonts included	5
Media thickness	0.48 mm
Dimensions (WxDxH)	598 x 397 x 235 mm
Power requirements	120V-240V (±10%, 50Hz/60Hz)
Connectivity technology	Wired
Compatible operating systems	Windows Vista 32/64, XP, 2000, 98, NT 4.0, 2003 Server
Print direction	Bi-directional
Maximum duty cycle	24000 pages per month
Mean time between failures (MTBF)	10000 h
Sound pressure level (printing)	55.5 dB
Power consumption (standby)	25 W
Power consumption (typical)	120 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	30 - 85 %