Need help?Do you have a question about the Oki ML5590/91 and is the answer not in the manual?
General| Type | Dot Matrix Printer |
|---|---|
| Print Width | 136 columns |
| Interface | Parallel, Serial, USB |
| Resolution | 360 x 360 dpi |
| Noise Level | 55 dB |
| Emulation | IBM ProPrinter, Epson LQ |
| Printing Method | Impact |
| Paper Handling | Continuous forms |
| Number of Pins | 24-pin |
Step-by-step instructions for establishing a USB connection between the printer and computer.
Detailed instructions for setting Top of Form and managing the Forms Tear-Off feature.
Adjusting printhead gap, selecting print quality modes, and setting character pitch.
How to reset the printer and change between different emulation modes.
Guides for entering/exiting menus, resetting defaults, printing settings, and changing menu options.
Detailed descriptions of various menu items, their groups, and available settings.
Detailed instructions for removing the old ribbon cartridge and installing a new one.
Procedures for loading paper using both rear and top feed paths, including specific steps for each.
Step-by-step guides for clearing jams from rear feed, repeating jams, and single sheet feeding.
Procedures for installing the ribbon cartridge and connecting the printer to a power source.
Instructions for connecting the printer to a PC via Parallel/USB interfaces.
Guide to performing printer self-tests, including Font Sample, Rolling ASCII, and Hexadecimal Dump modes.
To Next Page
