To Next Page
C
chapmanvalerieSep 8, 2025
What to do if sheets are off the paper guide on Oki Printer?
- WWilliam JacksonSep 8, 2025
If sheets are located off the paper guide in your Oki Printer, load sheets with their left edges against the paper guide.
What to do if sheets are off the paper guide on Oki Printer?
If sheets are located off the paper guide in your Oki Printer, load sheets with their left edges against the paper guide.
How to reset print position offset on Oki ML5100FB?
If the print position is offset on your Oki Printer, switch from off-line mode to on-line mode by pressing the SEL button when the printer is powered on. Reset the start position, ensuring that the Power Switch is set to OFF before you change the start position.
Why my Oki Printer has no power?
If your Oki Printer has no power, first ensure the power cable is properly connected to both the power outlet and the printer itself. If the connection is secure, plug another appliance into the same outlet to rule out any power outlet issues or a power outage.
What to do if SEL indicator is illuminated but Oki ML5100FB Printer doesn't print?
If the SEL indicator is illuminated on your Oki Printer but no printing occurs, check the interface cable. Ensure it is securely reconnected. If it's already connected, verify that you are using the correct interface cable.
Why is the print head moving but Oki Printer is not printing?
If your Oki Printer's print head is moving but no printing is occurring, the ribbon cartridge may not be installed. Install the ribbon cartridge to resolve this issue.
How to correctly select margins on Oki ML5100FB?
Reselect the left and right margins correctly in the application you are using with your Oki Printer.
How to load forms correctly on Oki ML5100FB?
If forms are loaded with their left holes out of line with the right ones on your Oki Printer, load forms with their left holes in line with the right ones.
How to cancel skip over perforation spacing on Oki Printer?
If several blank lines appear in the printout from your Oki Printer, cancel the skip over perforation spacing.
How to switch Oki Printer from continuous forms mode?
If your Oki Printer is in continuous forms mode, eject the continuous forms and select cut sheet mode for the printer.
How to match paper length on Oki ML5100FB Printer?
If the paper length selected in your application does not match the physical paper length in your Oki Printer, match the paper length selected in the application with the physical paper length in use.
Step-by-step instructions for safely powering on the printer.
Procedure to print a test page to verify the printer's operational status.
Instructions for installing the necessary printer driver software from the CD.
Guide to setting the paper thickness lever for various paper types and weights.
How to access and change printer settings using the menu system.
A table detailing menu items, their functions, and available settings.
General instructions for clearing paper jams from the printer.
Specific steps to resolve paper jams involving cut sheet paper.
Specific steps to resolve paper jams involving continuous forms.
Guidance on interpreting and responding to various alarm indicators on the printer.
General| Type | Dot Matrix Printer |
|---|---|
| Weight | 7.5 kg |
| Printing Method | Impact |
| Number of Pins | 9-pin |
| Resolution | 240 x 216 dpi |
| Interface | Parallel |
| Paper Size | A4, Letter |
| Paper Handling | Friction Feed |
| Noise Level | 55 dB |
