Oki ML5100FB - Setting the Paper Thickness Lever

Paper handling > 22
4. Lift the Pin Tractor covers (1) and remove the forms.
5. Close the Pin Tractor covers.
S ETTING THE P APER T HICKNESS LEVER
There are 9 lever positions, the first 9 for printing purposes and the ninth to also facilitate
ribbon replacement.
Set the Paper Thickness lever for different paper types as follows:
PAPER TYPE LEVER POSITION
1 2 3 4 5 - 9
Cut sheet paper See below
52 – 81 gsm X
81 – 128 gsm X
128 – 156 gsm X
Postcard X
Envelope X
Continuous paper See Below
52 - 81 gsm X
81 - 128 gsm X
Carbon paper or Pressure-
sensitive paper (40 gsm)
See below
2 part X
3 part X
4 part X
5 part X X
1