Need help?Do you have a question about the Oki ML280 Elite and is the answer not in the manual?
General| Color | No |
|---|---|
| Character pitch | 10, 12, 15, 17.1, 20 cpi |
| Maximum resolution | 240 x 216 DPI |
| Typestyles supported | Double height, Double width, Emphasised, Enhanced, Italics, Overscore, Underline |
| Maximum number of copies | 3 copies |
| Maximum print speed (draft) | 240 cps |
| Maximum printing width (columns) | 160 |
| Mean time between failures (MTBF) | 20000 h |
| Product color | Gray |
| Sound pressure level (printing) | 58 dB |
| Sound pressure level (quiet mode) | 51 dB |
| Standard interfaces | Parallel, USB 2.0 |
| Optional connectivity | Serial (RS-232), Serial (RS-422) |
| AC input voltage | 220 - 240 V |
| Voltage tolerance | 10 % |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 60 W |
Weight and Dimensions| Depth | 275 mm |
|---|---|
| Width | 372 mm |
| Height | 80 mm |
Guidance on how to navigate and utilize the user manual for optimal printer setup and operation.
Instructions for accessing and navigating the user manual electronically using Adobe Acrobat Reader.
Procedure for printing the entire manual, selected pages, or the current page via the print dialogue.
Recommendations for selecting a suitable, firm, and stable surface for printer placement.
Instructions for checking package contents and retaining packing materials for future transport needs.
Step-by-step guide to safely remove packing tape and printhead shipping restraints before initial use.
Guidelines for handling ribbon cartridges, including storage and precautions against ink stains.
Instructions on unpacking and installing the new ribbon cartridge onto the printhead mechanism.
Procedure for correctly aligning and firmly installing the platen knob onto the printer.
Guide to adjusting the print head gap for optimal print quality and paper feed based on stationery type.
Instructions for fitting the paper separator to prevent paper jams with single sheets and continuous stationery.
Steps for connecting the printer to a power source for both AC and DC models, including a warning about polarity.
Overview of the three paper types supported by the printer and general guidance for using fan-fold paper.
Detailed instructions for loading continuous form fan-fold paper using the rear feed path.
Instructions for loading continuous fan-fold paper using the bottom feed path with a slotted printer stand.
Guide to loading single sheets of paper from the top feed, including paper separator adjustment.
Procedure for performing a built-in self-test to verify printer setup and functionality, including interpreting test print results.
Overview of computer connection options, noting recommendations against simultaneous serial/USB and parallel connections.
Instructions for connecting the printer via a bi-directional parallel cable, emphasizing turning off devices first.
Steps for connecting the printer via a USB 1.1 cable, noting hot-pluggable protocol and specific PC requirements.
Guide for connecting the printer using a serial interface board, requiring RS232C compliance and turning off devices.
Explanation of printer drivers, their role in computer communication, and how to obtain or select compatible drivers.
Detailed explanation of the printer's front panel indicators and buttons, describing their functions and operations.
Describes special functions activated by pressing specific buttons during the printer's power-on sequence.
Information on the printer's internal MENU for setting default conditions to match computer parameters.
Step-by-step instructions to enter the printer's MENU mode for configuring default settings and options.
Table detailing default menu selections for various printer settings like Font, Graphics, and Interface options.
Instructions for loading paper using the pull tractor unit, including adjusting the tractors for paper width.
Guide to setting up and loading paper into the cut-sheet feeder, including paper guide adjustments.
Steps for loading a paper stack into the cut-sheet feeder and cautionary advice regarding simultaneous feeding.
Instructions for loading paper onto the roll paper stand, ensuring correct orientation and paper path.
Reference to the detailed procedure for replacing the ribbon cartridge, located in the 'Getting Started' section.
Reference to the guide for adjusting the printhead gap, found in the 'Getting Started' section.
Reference to the detailed instructions for loading paper, as provided in the 'Setting Up Your Printer' section.
Reference to the procedure for testing the printer's functionality, located in the 'Setting Up Your Printer' section.
General checks and common issues to verify before proceeding with detailed troubleshooting steps for printer problems.
Troubleshooting steps for the issue where the printer does not power on, focusing on power connections and fuses.
Diagnostic steps for when the printer fails to print, checking the SEL light, cable connections, and serial interface seating.
Solutions for printing incorrect characters or fonts, involving printer driver emulation and embedded commands.
Troubleshooting for ink smearing, likely caused by the print head gap being too close, recommending adjustment.
Solution for smeared printing after ribbon replacement, usually due to a loose or missing ribbon shield.
Fix for missing dots in printouts, often caused by incorrect head gap settings or a damaged printhead.
Troubleshooting steps for a flashing ALARM light, suggesting a power cycle and contacting service if the issue persists.
Explanation for non-functional front panel keys, possibly due to 'Limited Function' setting via Operator Panel Function.
Solution for false 'Paper out' errors, usually caused by the paper sensor groove in the platen not being covered.
Fix for torn sprocket holes with continuous paper, typically resolved by setting the paper lever to 'Fan-fold' mode.
General procedure for clearing paper jams, starting with turning off the printer and removing torn paper.
Specific steps for clearing paper jams occurring in the rear feed path, including handling potential hot printheads.
Identifies causes for repeating rear feed paper jams, such as defective or misaligned paper, and debris.
Procedure for clearing paper jams when using single sheets of paper, involving access cover and platen knob.
Guidance on purchasing printer parts and accessories, advising to note the model name and consult dealers or the website.
List of optional accessories available for the printer, such as tractor units, roll stands, and interface cards.
Details the print method used by the printer, specifying it as impact dot matrix with 9 pins and printhead features.
Lists supported printer emulations and details the various print speeds for different modes.
Table outlining paper specifications, including type, feed, weight, and width range for different paper formats.
Provides reliability metrics such as ribbon life, printhead life, and Mean Time Between Failures (MTBF).
Lists general physical characteristics of the printer, including dimensions, weight, buffer size, noise level, and power requirements.
Specifies the standard and optional interface types supported by the printer, including USB and serial connections.
Contact details for Oki Systems (UK) Limited, including address, telephone, fax, and website.
Contact information for Oki Systems Ireland Limited, providing address, phone, fax, and web details.
Contact details for OKI Systems Northern Ireland, including address, telephone, and website.
Specific contact information for technical support covering all of Ireland, including phone, fax, and email.
Contact details for Oki Data Corporation in Japan, including address, phone, and fax numbers.
Contact information for Oki Data (Singapore) Pte. Ltd., providing address, phone, and fax details.
Contact details for Oki Systems (Thailand) Ltd., including address, telephone, fax, and website.
Contact information for Oki Hong Kong Limited, providing address, phone, and fax numbers.
Contact details for The IPL Group in Australia, including address, phone, fax, and website.
Contact information for Comworth Systems Ltd. in New Zealand, providing address, phone, and fax details.
Contact details for Oki Data (S) P Ltd. Malaysia Representative Office, including address, phone, and fax.
To Next Page
