Need help?Do you have a question about the Oki ML5521 and is the answer not in the manual?
General| Type | Dot Matrix Printer |
|---|---|
| Maximum Resolution | 360 x 360 dpi |
| Connectivity | Parallel, USB |
| Number of Pins | 24 |
| Noise Level | 55 dBA |
| Printing Method | Impact dot matrix |
Feature allows tearing off printed continuous forms without wasting paper.
Allows printing single sheets without removing continuous feed paper.
Details about printer emulations like IBM PPR, Epson, Microline.
Steps to install Oki printer drivers from the CD.
Guidance on selecting compatible drivers for printer use.
Overview of available printer data interfaces, including Parallel and USB.
Instructions for connecting the printer via USB cable.
Identification of printer components for rear and top feed.
Sets the print start position, adjustable in increments.
Details and instructions for using, setting, and troubleshooting Forms Tear-Off.
Switch to single-sheet printing without removing continuous forms.
Instructions for switching between continuous forms and single sheets.
Procedure to adjust the distance between the printhead and the platen.
Selection of print quality modes like HSD, UTL, NLQ.
Setting character pitch for different emulations and proportional spacing.
How to reset the printer to clear error conditions.
List of supported emulations and how to change them.
Explanation of front panel keys and how to enter/exit Menu Mode.
How to navigate, change, print, and understand all printer menu settings.
Step-by-step guide for replacing the printer ribbon cartridge.
Instructions for loading continuous paper via rear feed and single sheets via top feed.
Procedures to clear jams from rear feed and single sheet paths.
Guide on how to clean the printer housing.
Initial checks before proceeding with detailed troubleshooting.
Addresses common issues like no power, no print, errors, and paper problems.
Information on how to identify and purchase printer parts and accessories.
List of control codes for IBM Proprinter III emulation.
List of control codes for Epson FX emulation.
List of control codes for Oki Microline emulation.
Technical specifications of the printer, including print method and interfaces.
Guidelines for printer placement and unpacking procedures.
Step-by-step guide for installing a new ribbon cartridge.
Instructions for connecting the printer to power and computer interfaces.
Procedures for performing printer tests like Font Sample, ASCII, and Hexadecimal Dump.
Contact details for Oki Systems in various global regions.
To Next Page
