Oki ML280 Elite User Manual

SETTING UP YOUR PRINTER > 16
SETTING UP YOUR PRINTER
P
OWER
C
ONNECTION
Make sure both the printer and the computer are switched OFF.
FOR AC MODELS:
1. Plug the power cord into the back of the printer, then into a
grounded AC outlet.
2. Switch the Printer ON.
FOR DC MODELS:
With the printer switched OFF.....
1. Terminate the free ends of the power cord with connector(s)
appropriate for connection to your DC voltage source.
WARNING!
Observe polarity of connection!

Oki ML280 Elite Specifications

General

Color	No
Character pitch	10, 12, 15, 17.1, 20 cpi
Maximum resolution	240 x 216 DPI
Typestyles supported	Double height, Double width, Emphasised, Enhanced, Italics, Overscore, Underline
Maximum number of copies	3 copies
Maximum print speed (draft)	240 cps
Maximum printing width (columns)	160
Mean time between failures (MTBF)	20000 h
Product color	Gray
Sound pressure level (printing)	58 dB
Sound pressure level (quiet mode)	51 dB
Standard interfaces	Parallel, USB 2.0
Optional connectivity	Serial (RS-232), Serial (RS-422)
AC input voltage	220 - 240 V
Voltage tolerance	10 %
AC input frequency	50 - 60 Hz
Power consumption (typical)	60 W

Weight and Dimensions

Depth	275 mm
Width	372 mm
Height	80 mm