Need help?Do you have a question about the Oki ML320Turbo and is the answer not in the manual?
Offers essential guidelines for safely and correctly installing the printer.
Instructions on how to properly connect the printer to a power source.
Step-by-step guide for loading continuous forms and single sheets into the printer.
Explains how to run self-tests to verify printer installation and functionality.
Steps for installing the printer as a local device on a computer.
Details the process of installing printer drivers for various Windows versions.
Instructions for setting up the printer for network use.
Explains how to set the starting print position for accurate page alignment.
Details how Top of Form settings interact with the Forms Tear-Off feature.
Step-by-step instructions for setting Top of Form when Forms Tear-Off is enabled.
Step-by-step instructions for setting Top of Form when Forms Tear-Off is disabled.
Guides on restoring the Top of Form setting to its original factory state.
Explains the Forms Tear-Off feature for automatic page tearing.
Explains the printhead gap and how to adjust it for different media.
Explains how to select different print quality modes (draft, letter quality).
Guides on how to reset the printer to clear errors or reinitialize.
Lists available printer drivers and how to select the correct one.
Explains how to access and navigate the printer's menu system.
Steps to restore all menu settings to their original factory defaults.
Guides on modifying various printer settings via the menu.
Instructions for replacing the printer's ribbon cartridge.
Procedures for clearing rear-feed paper jams from the printer.
A compilation of common printer issues and their corresponding solutions.
Addresses issues where software settings override printer configurations.
Solutions for when the printer shows no signs of power or operation.
Steps to diagnose issues where data is not being printed.
Solutions for garbled or incorrect print output, often related to drivers or emulations.
Troubleshooting steps when the printer's ALARM light indicates an issue.
Diagnoses a specific ALARM light condition related to paper lever position.
Identifies a paper jam indicated by specific ALARM and light combinations.
Detailed specifications for various paper types and sizes supported by the printer.
Power requirements and voltage specifications for the printer.
General safety precautions for operating the printer.
To Next Page
General
