36 Microline 320/321 Turbo/n
|
Local Printer Installation
!
You MUST install your printer as a Local Printer before
you perform any network installation.
During this part of your printer installation, you DO
NOT connect a cable between your printer and your
computer.
You are making an installation to a logical port, which
is done through software, not physical connections.
!
If you want to use the parallel port, you MUST remove
the Network Card from the printer. See the OkiLAN
6120e User’s Guide for details.
Installing Printer Software
Windows 95, 98, Me, NT4.0
1 With the OKI ML 320/321 Turbo/n CD in your CD-ROM
drive, click Start® Run.
2 Browse to your CD-ROM drive, then double-click
install.exe.
3 On the OKI Menu Installer main menu, click Printer
Software.
4 Make sure that at least the ML320/1 Tn Driver is
selected. Click Next.
5 Select Local Printer. Click Next.
6 Select LPT1. Click Next.
7 Click Finish.
To Next Page
Loading...
Need help?
General
