38 Microline 320/321 Turbo/n
|
Connecting the Network Cable
1 Plug the power adapter wire into the power jack on the
OkiLAN 6120e. Then plug the power adapter into a 120
VAC wall outlet.
!
Some countries may require a different adapter for
local voltages, such as 240 VAC.
6120e_5.jpg
Network Printer Installation
!
You MUST install your printer as a Local Printer before
you perform any network installation.
!
If you want to use the parallel port, you MUST remove
the Network Card from the printer. See the OkiLAN
6120e User’s Guide for details.
To Next Page
Loading...
Need help?
General
