40 Microline 320/321 Turbo/n
|
1 Plug the interface cable into the parallel port (1) and
secure it with the wire loops.
32T-22.eps
2 Attach the other end of the cable to your computer.
Connecting to the Parallel Port
!
If you want to use the parallel port, you MUST remove
the Network Card from the printer. See the OkiLAN
6120e User’s Guide for details.
!
FCC regulations require the use of a shielded cable no
longer than 6 ft. (1.8 m).
An IEE 1284-compatible parallel cable is needed for
bi-directional communications.
1
To Next Page
Loading...
Need help?
General
