SETTING UP YOUR PRINTER > 17
2. Plug the power cord into the back of the printer and lock by
twisting the collar of the connector clockwise.
3. Switch the Printer ON.
L
OADING
P
APER
Three types of paper can be used with your printer:
l Single sheet (with or without the optional cut sheet feeder)
l Roll paper (use the correct rollpaper stand)
l Fan-fold paper (with or without the optional tractor feed unit)
When using fan-fold paper, adjust the distance between the sprocket
pins at the ends of the platen to the holes in the paper. Fan-fold paper
can be fed from the rear of the printer, or, if a slotted stand is
available, from underneath.
REAR FEED CONTINUOUS FORM FAN-FOLD PAPER
Ensure that the printer is switched OFF and the power supply lead
removed.
1. Place a box of fan-fold paper behind the printer.
2
3
To Next Page
Loading...
