GETTING STARTED > 13
4. Press gently on the ribbon cartridge until you feel it click into
place.
5. Turn the take-up knob (a) in the direction of the moulded arrow
to take up any ribbon slack.
6. Replace the access cover.
I
NSTALLING
THE
P
LATEN
K
NOB
If the Platen Knob is not already fitted, align the key way (a) correctly
and push it firmly into place.
CAUTION!
Do not remove the ribbon shield (“X” in graphic above) from the
ribbon!
a
a
To Next Page
Loading...
