Getting started > 11
P
OWERING
ON
YOUR
PRINTER
1. Ensure that your printer Power Switch is set to OFF.
2. Connect the power cable connector (1) to the power connector (2) on the printer.
3. Connect the power cable to a 220/240 V AC power outlet and switch on the outlet
power.
4. Turn the printer Power Switch to ON.
5. Check that the POWER and SEL indicator on the control panel illuminates.
WARNING!
Operations of this equipment are not warranted when the
equipment is connected to UPS (Uninterruptible Power Supply)
and/or inverter. Doing so may result in damage of this equipment.
Do not use an UPS and/or inverter.
ON OFF
1
2
ON OFF
To Next Page
Loading...
