Oki ML5590/91 - Page 93

> 93
Limited Operation ................ 39
,
69
Line Spacing...............................39
Bottom Feed............................32
Rear Feed ................................32
Loading Paper.............................88
M
Margin, Bottom.................... 33
,
36
Mean Time Between
Failures (MTBF) ..........................77
Mean Time to Repair (MTTR) ........77
Memory, Receive Buffer Size .......77
MENU light .................................29
O
Operator Panel Function..............69
P
Page Length
Rear Feed ................................32
Top Feed .................................33
Page Width .................................39
Bottom Feed............................32
Rear Feed ................................32
Setting in the Printer
Menu .............................. 33
,
39
Top Feed .................................33
Paper
Static ......................................69
Thickness................................78
Widths ............................. 33
,
39
Setting in the Printer
Menu..................................39
Paper Jams .................................68
Paper Lever.................................68
Paper Out ...................................68
Override ........................... 33
,
40
Parallel (LPT), IEEE 1284..............87
Parallel Interface.........................34
I-PRIME Signal .........................65
Perforation, skip over........... 32
,
42
Pitch, character...........................40
Postnet.......................................78
Power Connection .......................86
Print Method...............................77
Print Mode..................................40
Print Registration ................. 33
,
40
Print Size....................................78
Print Speed............................ 6
,
77
Print Suppress ..................... 33
,
41
Printhead ...................................77
Proportional Spacing ..................41
R
Rear Feed
Form Tear-Off ................... 32
,
33
Line Spacing............................32
Skip Over Perforation...............32
Receive Buffer Size .....................77
Reliability ...................................77
Ribbon Shield ................ 44
,
67
,
85
Rolling ASCII Test........................90
RS-232C Serial Interface .............77
S
Serial Interface Option ................66
Setting up your Printer ................81
Skip Over Perforation ..................32
Software
Embedded commands .............67
Matching drivers to emulations 67
Software vs. printer settings ....65
Symbol Sets ...............................39