4345-E P-22
SECTION 5 OPERATING REPORT
(2) Operating Time in the Period Operating Report
The operating time of each item displayed on the operating report is the accumulated time from
the day the operating report was cleared last. When the NC is turned on in the same day set as
the clear date, the period operating report is cleared and the operating time is accumulated
from "0".
• The period operating report clear day is set at a MacMan Parameter displayed in the param-
eter setting mode.
• The period operating report is cleared at the first power on operation to the NC on the same
day as set for the OPERATING REPORT CLEAR DAY. The report is not cleared in the suc-
ceeding power on operation.
• Make sure that no holiday is set as the OPERATING REPORT CLEAR DAY. The operating
report is not cleared only when the NC is turned on in the preset report clear date.
Example: setting the period operating report clear day
• To use the period operating report as the weekly report, set the date of Monday of the next
week (Tuesday, if Monday is holiday) for PERIOD OPERATING REPORT CLEAR DAY.
• To use the period operating report as the monthly report, set the first day of the next month (the
second day if the first day is holiday) for PERIOD OPERATING REPORT CLEAR DAY.
• To collect the result of improvements in operation, set the next day on the day when improve-
ment preparation has been finished.
To Next Page
Loading...