4345-E P-32
SECTION 9 OPERATION HISTORY
(5) Record of manual data input is displayed as follows:
(6) If an error occurs, the error number and the error character-string are displayed as an error
record.
The illustration below shows an example of record displayed when Error "337 floppy ready"
occurred.
EIOSPKKUB012R01
(7) Record of mode change is displayed as follows:
(8) When a help screen is opened by depression of the help key, the following record is displayed:
When the help screen is closed by re-depression of the help key, the record is displayed as fol-
lows:
(9) When a window is closed using the one-touch window close function (pressing the same mode
key as the currently selected one when the window is open), the record is displayed as follows:
(10) When a turret is changed on the lathe by depression of turret A key or turret B key, the record is
displayed as follows:
MDI Input: "Input character string"
Mode Change: "Mode name"
Help
Mode Change: "Mode name"
One-touch Window Close: "Mode name"
A-Turret
(when turret A is selected)
B-Turret
(when turret B is selected)
To Next Page
Loading...