Fuel
Press FUEL to see how much fuel has been used since
you last pressed the reset button. The display will show
a reading such as:
10.4
GALLONS
USED or
39.4
LITERS USED
To learn how much fuel will be used from a specific
starting point, first press FUEL to display fuel used,
then press RESET.
Don’t confuse fuel used with
the
amount of fuel
in
your tank.
Fuel Range
RANGE calculates the remaining distance you can drive
without refueling. It’s based on fuel economy and the
fuel remaining in the tank. The display will show a
reading such as:
FUEL RANGE
235 MI
or
FUEL
RANGE
378
KM
If the range is less than
50
miles
(80
km), the display
will read LOW FUEL RANGE.
The fuel economy data used to determine fuel range is
an average of recent driving conditions.
As
your driving
conditions change, this data is gradually updated.
Resetting fuel range causes the fuel economy data to be
updated immediately. To reset fuel range, press
RANGE, then RESET.
Average Speed
The calculation for average speed begins when SPEED
is reset. Press SPEED to display the average speed,
such as:
AVG
SPEED
55
MPH or AVG SPEED
90
KM/H
To reset the average speed, press SPEED and
then RESET.
Engine
The
ENG
button scrolls through the following functions:
0
Oil pressure, such as:
OIL PRESSURE
40
PSI
or
OIL
PRESSURE
276
Wa
0
Battery voltage, such as:
BATTERY
13.8
VOLTS
Transaxle fluid life, such as:
TRANS FLUID
LIFE
40%
This is an estimate of the transaxle fluid’s remaining
useful life. It will show 100% when the system is
reset after a transaxle fluid change. It
will
alert you
to change your transaxle fluid on a schedule
consistent with your driving conditions.
To Next Page
Loading...
