Selectable Shift
This button lets you change from a normal driving mode
to a power mode. For general driving conditions, use the
normal mode.
Parking Brake
Press the button on your shift lever
so
that it’s either in
the NORMAL or the
POWER
position. When it’s in the
NORMAL position, the line on the button will be
showing. When in POWER, the line is not showing.
In
the NORMAL position, the transaxle shifts at lower
engine speeds. For increased performance, you may
choose the POWER mode.
Setting the parking brake:
Hold the regular brake
pedal down with your right foot. Push down the parking
brake pedal with your left foot.
If
the ignition
is
on, the
parking brake indicator light will come on.
To Next Page
Loading...
Need help?
General
