Comfort
Controls
This section tells you how to operate your climate
control system. Your climate control system uses
ozone-friendly
R-
134a refrigerant.
Automatic Electronic Climate Control
Your vehicle is equipped with a Dual Zone Automatic
Electronic Climate Control System. You can use the
automatic setting or override the automatic setting
by
using the manual controls. Your vehicle also has the
flow-through ventilation system described later in
this section.
If the display ever starts flashing after the automatic
electronic climate control system
is
started, there is
a
problem with the electronic climate control system and
you
should see your dealer for service.
AUTO-PUSH
Knob
By pressing the AUTO-PUSH knob, you have selected
the electronic climate control system to be in the
automatic mode. The climate control system will
automatically control the air temperature, air distribution
and the fan speed based
on
the temperature inside the
vehicle, the outside temperature and the sun load.
0
0
0
Press
the
AUTO-PUSH knob. The lights on the
AUTO-PUSH and the AUTO FAN knobs will
illuminate. Your current comfort setting will be
shown
in
the digital display.
Set the comfort level you want inside the vehicle by
using the colored buttons located below the climate
control display.
Rotating the AUTO-PUSH knob selects
manual air delivery mode operation
of
the
climate
control system.
3-2
To Next Page
Loading...
Need help?
General
