Temperature Buttons
To adjust the comfort level you want maintained inside
the vehicle, use the red and blue buttons located below
the digital display. If you want a warmer comfort level,
push the red button.
If
you want a cooler comfort level,
push the blue button. Your selected comfort setting will
be displayed on the digital screen for five seconds, then
the outside temperature will be displayed.
AUTO
FAN
Knob
Mode Control
Rotate the AUTO-PUSH knob to deliver air through the
floor, upper or windshield outlets. The system will stay
in the selected mode until the AUTO-PUSH knob
is pressed.
This knob controls the fan speed in either an automatic
mode or a manual mode.
0
Pressing the AUTO FAN knob puts the fan control
in the automatic mode. The AUTO
FAN
light will
appear below the knob. The fan speed indicators will
not be illuminated when the system is in the
automatic fan control mode.
Rotating the AUTO FAN knob selects a manual fan
speed. Rotate this knob to the right to raise the fan
speed. Rotate this knob to the left to lower the fan
speed. Rotating the AUTO FAN knob overrides the
automatic fan control mode, The fan speed indicators
will be illuminated while in the manual fan
control mode.
3-3
To Next Page
Loading...
Need help?
General
