Ignition Positions
C
I
A
E
With the ignition key in the ignition, you can turn the
switch to five positions:
ACCESSORY
(A):
In this position you can operate
your electrical power accessories. Press in the ignition
switch as you turn the top
of
it toward
you.
LOCK
(B):
This is the only position in which
you can remove the
key.
This position locks your
ignition, steering wheel and transaxle. It’s a
theft-deterrent feature.
OFF
(C):
This position lets you turn off the engine
but still turn the steering wheel. It doesn’t lock the
steering wheel like
LOCK
and it doesn’t send any
electrical power
to
the accessories. Use
OFF
if you
must have your vehicle in motion while the engine
is not running.
RUN
(D):
This
is
the position that the switch returns
to after you start your engine and release the switch.
This
is
the position for driving. Even when the engine
is not running, you can
use
RUN
to operate your
electrical power accessories and to display some
instrument panel warning lights.
To Next Page
Loading...
Need help?
General
