Power Lumbar
Control
I
--
.
..
.........._
..........................................................
The power lumbar controls are located
on
the driver’s
and passenger’s door panels.
The rear lumbar control adjusts upper lumbar support,
and the front control adjusts lower lumbar support.
Press the front
of
the switch to increase support. Press
the back
of
the switch to decrease support.
Memory
Seat
and Mirrors
The memory function
controls both the driver’s
seat cushion and outside
mirror positions. It does
not store the lumbar or
recline positions.
at3
%
...............
-...
...................
-.
.....
-_..
...
._
To set your memory seat cushion and mirrors:
1.
Position the driver’s seat and both outside mirrors
where you want them. See “Mirrors” in the Index.
2.
Press the
SET
button. You will hear
one
beep.
3.
Within
five
seconds, press either the
1
or
2
button.
You will hear two beeps.
1-3
-