If you prefer to program the exit seat position, which
moves the seat completely down and back, follow
these steps:
1.
Press the
SET
button on the driver’s door panel.
You will hear one beep.
2.
Press one of the memory buttons on the driver’s
door panel. You will hear one beep, but the seat
will not move at this time.
3.
Press the UNLOCK button on the appropriate
transmitter within five seconds. You will hear
two beeps.
This personalization feature will work only when the
vehicle is in
PARK
(P).
A
beep will sound inside the
vehicle when the UNLOCK button on the transmitter
is pressed to move the seat and mirrors.
To turn this feature off, press
SET
and then UNLOCK
within five seconds.
Heated
Front
Seat
(Option)
7-
I
This feature will quickly heat the lower cushions and
lower back of the driver and front passenger seats for
added comfort.
Press the button once to turn the heater on high. The
HI
indicator light below the button will glow. Press it again
to turn the heater on low. The
LO
indicator light below
the button will glow. Press it a third time to turn the
heater off. The heater will turn
off
automatically when
the ignition is turned to
OFF.
To Next Page
Loading...
Need help?
General
