I
RECOMMENDED SAE VISCOSITY GRADE ENGINE
OILS
I
FOR BEST FUEL ECONOMY AND COLD STARTING, SELECT THE LOWEST
I
SAE VISCOSITY GRADE OIL
FOR
THE EXPECTED TEMPERATURE RANGE.
I
HOT
WEATHER
/OF
OC'
-
+loo-
t38
-
+EO-
t27
-
+60-
-
+16
-
+40--+4
+20---7
0---18
I
\WI
COLD
WEATHER
-1
-I
111.
SAE
1d-30
PREFERRED
above
IPF
(-l WC)
SAE
5W-30
DO NOT USE
SAE
2OW-50
OR
ANY
OTHER GRADE
OIL
NOT RECOMMENDED
As
shown in the chart,
SAE
low-30
is best for your
vehicle. However, you can use
SAE
5W-30 if it's going
to be colder than
60°F
(
16
"
C)
before your next oil
change. When it's very cold, you should use
SAE
5W-30. These numbers on an oil container show its
viscosity, or thickness.
Do
not use other viscosity oils.
such as
SAE
20W-50.
NOTICE:
Use only engine oil with the American Petroleum
Institute Certified For Gasoline Engines
"Starburst" symbol. Failure to use the
recommended oil can result in engine damage not
covered by your warranty.
GM
Goodwrench@ oil meets all the requirements for
your vehicle.
If you are in an area where the temperature falls below
-20°F
(-29"C),
consider using either an
SAE
5W-30
synthetic
oil
or an
SAE
OW-30 oil. Both will provide
easier cold starting and better protection for your engine
at extremely
low
temperatures.
6-
13
To Next Page
Loading...
Need help?
General
