3.
Just before it reaches the end, give
it
a quick pull.
4.
Let the belt go back all the way. You should hear a
slight clicking sound. If you don’t, the adjustment
feature won’t set, and you’ll have to start again.
5.
Now
you
can add a small amount
of
slack. Lean
forward slightly, then sit back.
If
you’ve added more
than
1
inch
(25
mm)
of
slack, pull the shoulder belt
out as you did before and start again.
If you move around in the vehicle enough,
or
if
you pull
out the shoulder belt, the belt will become tight again.
If
this happens,
you
can reset it.
1-15
To Next Page
Loading...
Need help?
General
