5.
Twist the socket one-quarter
of
a
turn
to the left
(counterclockwise) and pull to remove.
6.
Replace the bulb and reverse Steps 1 through
4
to
replace the assembly and tighten the bolts.
Interior
Lamps
Front and Rear Reading Lamps
To change the bulbs in the front and rear reading lamps,
do the following:
1.
Carefully insert a flat head screwdriver in the slot
2.
Gently pry the lens cover away to expose the reading
3.
Remove the bulb from its assembly and install a
between the lens cover and molding.
lamp bulb. The lens cover should
pop
off.
new bulb.
4.
Snap the lens cover back in place.
6-42
To Next Page
Loading...
Need help?
General
